What are the common size of aluminum slatwall panel？
The regular sizes of aluminum slatwall panels can vary according to different application scenarios and needs.
However, the following are some common specifications and size ranges:
1. conventional thickness of aluminum slatwall panels:
Thickness is an important factor in determining its strength and stability.
Common thickness: 1.2mm to 4mm. this is the common range of thickness available in the market. Among them, 1.2mm thickness is more common in the market. It is suitable for most decorative scenarios.
- The thickness of aluminum Slatwall for outdoor use is usually chosen as 2.5mm or 3mm.
- For lower floors and podiums, a thickness of 2.0mm may be selected.
- Indoor walls and ceilings can choose the thinnest 1.2mm or 1.5mm.
2. Length and width of aluminum slatwall panels:
Common length: 2400mm, 3000mm, 3200mm, 3600mm, 4000mm, 5000mm, etc.
It should be noted that the regular length size is within 4000mm. Exceeding this size may increase the cost and transportation difficulty.
Want to know the specific price of the aluminum slatwall panel please click Hugh aluminum
Common width: 122mm, 135mm, 150mm, 200mm, etc..
122mm x 2440mm aluminum slats are the most common size in the market.
While the width of aluminum slat wall panels over 300mm may need to be customized, the cost will be relatively high.
3. aluminum slatwall panel size ratio:
When choosing the size of the aluminum slat wall panel. We also need to consider the ratio of length and width.
Generally speaking, the best ratio is 4:1, which is easy for transportation and installation. For example, 300mm1200mm.
In any case, this needs to be based on the size of your store display wall or building facade. Only then can you make a reasonable ratio design.
Below is a table of aluminum slatwall panel sizes from Hugh’s aluminum
| item type | Aluminum Slatwall Panel Size（mm） | Descriptions |
| Wall thickness | 1.2-3.0mm | Suitable for different strength and stability requirements |
| Length | 1000mm-6000mm | Regular length and extra long customization options |
| Width | 122-200mm | Regular width and extra wide customization options |
| Outdoor size | 2.0mm wall thickness | At least 2mm wall thickness is required for safety. |
| Exterior Wall Decoration | 2.0mm wall thickness | At least 2mm wall thickness is required for safety. |
| Store Display Side | 1.0mm-1.5mm wall thickness | – |
| ratio | 2:1，1:5, customized | Depends on design needs |
| Application | – | store display hanger |
In addition to the regular sizes mentioned above. Many aluminum slatwall panel producers also offer customization services.
Hugh Aluminum can customize aluminum slatwall panels in different widths, lengths, and thicknesses according to customers’ specific needs, which provides customers with more choices. It can meet the needs of different application scenarios and decorative styles.
